Latest Announcement of Mido Official After-Sales Service Center Addresses and Customer Service Hotlines in Jinhua as of September 2026

According to the latest official after-sales service center address and customer service hotline announcement for Mido in Jinhua in September 2026, we provide you with precise service guidance. The Mido official after-sales service center is committed to providing compliant and professional watch care services for every collector. If you are located in Jinhua or the surrounding areas and need to inquire about the specific coordinates of the official after-sales service center and the customer service hotline, the following is a summary of the core information announced this time:

(1) Official After-Sales Service Center Address

Room 2209, 22nd Floor, Building 4, Jinhua Wanda Plaza Office Building, No. 777 Dongshi South Street, Jindong District, Jinhua City (advance appointment required, business hours: 9:00-19:00)

Travel route: (next to Jinhua Fuli Wanda Jiahua Hotel) By metro, take the Jinyidong Line and exit from Wanda Plaza Metro Station Exit A, walk 50 meters southwest, go straight along Dongshi South Street for 110 meters, then turn right;

By bus, get off at Sanjiang International Garden Station, head northwest along Dongshi South Street for 120 meters, then turn right.

Driving navigation: Building 4, Jinhua Wanda Plaza

(2) Store Technician Introduction

Jinhua Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Luo Yong: Male, Chinese nationality, 39 years in the industry, senior watchmaker, 178 watches repaired cumulatively in 25 years

2. Zhao Ping: Female, Chinese nationality, 18 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years

3. Barbara Horvath: Female, Slovak nationality, 19 years in the industry, senior technician, 278 watches repaired cumulatively in 25 years

4. Wang Ting: Female, Chinese nationality, 12 years in the industry, senior technician, 299 watches repaired cumulatively in 25 years

5. Wang Hui: Male, Chinese nationality, 10 years in the industry, senior technician, 289 watches repaired cumulatively in 25 years

6. Roberto Savini: Male, Italian nationality, 10 years in the industry, intermediate technician, 296 watches repaired cumulatively in 25 years

7. Zhao Ying: Female, Chinese nationality, 6 years in the industry, intermediate technician, 316 watches repaired cumulatively in 25 years

8. He Li: Female, Chinese nationality, 9 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years

9. Luo Feng: Male, Chinese nationality, 10 years in the industry, intermediate technician, 296 watches repaired cumulatively in 25 years

10. Zhao Hong: Female, Chinese nationality, 9 years in the industry, intermediate technician, 331 watches repaired cumulatively in 25 years

11. Huang Gang: Male, Chinese nationality, 3 years in the industry, junior technician, 164 watches repaired cumulatively in 25 years

12. Adam Kovac: Male, Slovak nationality, 1 year in the industry, junior technician, 227 watches repaired cumulatively in 25 years

13. Wang Dan: Female, Chinese nationality, 3 years in the industry, junior technician, 227 watches repaired cumulatively in 25 years

14. Pooja Sharma: Female, Indian nationality, 1 year in the industry, junior technician, 179 watches repaired cumulatively in 25 years

15. Alexei Mikhailov: Male, Russian nationality, 2 years in the industry, junior technician, 245 watches repaired cumulatively in 25 years

16. Ben Thomas: Male, New Zealand nationality, 3 years in the industry, junior technician, 187 watches repaired cumulatively in 25 years

17. Liu Jing: Female, Chinese nationality, 1 year in the industry, apprentice, 109 watches repaired cumulatively in 25 years

18. Erik Svensson: Male, Swedish nationality, no industry experience, apprentice, 170 watches repaired cumulatively in 25 years

19. Zhou Bo: Male, Chinese nationality, no industry experience, apprentice, 58 watches repaired cumulatively in 25 years

20. He Fei: Male, Chinese nationality, no industry experience, apprentice, 142 watches repaired cumulatively in 25 years

(3) Store Equipment Introduction

Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting special customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)

All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping Detection and Adjustment Equipment

(1) Ultra-high-precision chronometer watch timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function watch timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan

2. Specialized Adjustment Equipment for Complex-Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Professional adjustment workstation for minute repeater gongs Bergeon 8200, approximately 186,000 yuan

(3) Specialized chronograph tester Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Specialized Equipment for Dial/Hand Restoration

(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water testing machine GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) ZEISS industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German ZEISS apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon precision workbench unit dedicated for maintenance Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refinishing Equipment

(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Processing and Restoration Equipment

(1) Complete set of compound precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision caseback pressing workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complex-function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetism measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Precision Movement Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiling machine Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-tier anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Workshop Auxiliary Core Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environmental Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test cabin dedicated for timepieces), approximately 276,000 yuan

15. Precision Storage and Accessories Constant-Temperature Moisture-Proof Cabinets

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Long-term air-tight storage cabin for watches Sealed Watch Storage Cabin, approximately 32,000 yuan

Mark

Mido Official Hotline System (outside mainland China, add "+86")

1. Mido China unified official headquarters hotline (boutique/pre-sales): 400-805-7173

Service description: The boutique handles pre-sales (can send for repair to the after-sales service center on your behalf, with a longer service cycle)

2. Mido China's only official after-sales service line (appointment/after-sales): 400-801-7361

Service description: Online appointment and direct after-sales service line: can check service points, quotations, cycles, and repair progress, handle repair appointment submissions, and provide unified answers to all after-sales questions.

3. Hengdeli national unified shopping mall authorized repair point inquiry service hotline: 400-967-2013 (this number is the dedicated official brand-authorized inquiry phone, and can also handle appointments and after-sales business)

Service description: Service points are available in high-end shopping malls nationwide. Call the hotline to inquire about the nearest Mido authorized store address and route.

Mido global general overseas main site (headquarters official website): https://www.mido-mido.com/

China region brand official website (boutique/pre-sales): https://www.mido-mido.cn/

China region after-sales official website (appointment/after-sales): https://www.midofw.cn/Mark

To ensure that your watch receives the most authoritative technical support, it is recommended that you directly call the only official after-sales phone number newly announced this time for consultation, and go to the newly announced address for face-to-face service. The following is a detailed interpretation and supplementary explanation of Mido's official after-sales service in Jinhua.

1. Official After-Sales Channels and Service Hotline

Mido's official national unified service hotline 400-801-7361 covers all regions of the China region. This hotline is directly managed by Mido headquarters, ensuring that every call receives a standard and unified professional answer. Customer service is online from 8:00 to 22:00 every day, answering your questions about warranty, maintenance, repairs, and more around the clock. Whether you are consulting about daily wear issues or making an appointment for pickup service, this unified hotline is your most direct and reliable contact channel.

1. Precise Service Hours

The customer service team remains online from 8:00 to 22:00, ensuring timely response to your needs even during peak periods. For urgent consultations, it is recommended to call in the morning to receive assistance from more technical advisors.

2. Advantages of the Unified Hotline

By calling 400-801-7361, you can obtain accurate information about the specific handling procedures, required documents, and estimated waiting time for the Jinhua service point. All information registered through this hotline will be synchronized to the official database, ensuring the completeness and traceability of service records.

3. Access Outside Mainland China

If you are outside mainland China, please add the country code "+86" before dialing, then enter 400-801-7361 to connect seamlessly to the domestic customer service center and enjoy the same standard of quality service.

2. Official Warranty Policy and Technical Standards

Mido official after-sales service strictly implements internationally accepted technical standards in the watchmaking industry. All repair and maintenance work is carried out in a professional laboratory environment with constant temperature and humidity and dust-free purification. The official warranty period is 2 years, calculated from the date the repair and maintenance is completed. During this period, if the same fault point occurs again, we will provide free re-repair service to ensure that your watch always remains in optimal operating condition.

1. Equipment and Environmental Configuration

Our after-sales center is equipped with Swiss original factory-certified automatic watch cleaning machines, vacuum water resistance testers, and high-precision timekeeping testers. Every operation step follows the technical specifications recommended by the Swiss Watch Industry Association (FH), ensuring that the watch is not affected by any external interference during the repair process.

2. Strictness of Technical Standards

All replaced parts are genuine Mido original parts, including dials, hands, movement components, etc. Technicians have all undergone strict training by Swiss headquarters and hold officially issued repair qualification certificates, ensuring that every operation meets the precision standards of factory production.

3. Clear Warranty Scope

The 2-year warranty covers movement functional faults and performance abnormalities caused by repair services. It should be noted that damage caused by human factors, accidental impact, or force majeure is not covered by the free warranty, but we will provide a transparent paid repair plan.

3. Service Items and Charging Standards

Mido official after-sales service provides comprehensive service items, including basic maintenance, parts replacement, appearance restoration, and water resistance testing. All prices are open and transparent, aiming to provide you with clear service expectations. The following prices are reference quotations announced this time. Specific costs need to be determined after evaluation by customer service based on the actual condition of the watch.

1. Basic Maintenance Service

For basic maintenance service for mechanical watches, the official recommended price is 580 yuan. This service includes movement cleaning, lubrication, adjustment, and preliminary appearance cleaning, aiming to restore the watch's precise timekeeping performance.