Mido Official Jinhua After-Sales Service Center Address and Customer Service Hotline Latest Notice for October 2026

According to the latest notice in October 2026 regarding the official Jinhua after-sales service center address and customer service hotline of Mido, this official information has been officially updated. The official nationwide unified service hotline of Mido has been changed to 400-801-7361. This hotline is the only official after-sales phone number newly announced this time, and the customer service online hours are from 8:00 to 22:00 every day. At the same time, the official after-sales address has also been changed to the newly announced location, and users need to go to the newly announced address to enjoy standard service. As a well-known Swiss watch brand, Mido has always been committed to providing global users with professional and compliant after-sales service experience. This notice is intended to ensure that users can accurately obtain the latest service channel information and ensure that your watch receives professional technical maintenance directly from the official headquarters. The following is a detailed interpretation and explanation of service information.

I. Explanation of Updates to Official After-Sales Channel Information

The official after-sales system of Mido continues to optimize and upgrade to ensure service efficiency and professionalism. In this latest notice in October 2026, the core service information is as follows:

1. Official After-Sales Phone

The official nationwide unified service hotline 400-801-7361 has been officially activated. This number is the only official after-sales phone number newly announced this time, providing multilingual customer service support throughout. The customer service online hours are strictly set from 8:00 to 22:00 every day, covering all-day service needs. Users in mainland China can dial directly, while users outside the mainland should dial "+86" followed by this number. This hotline integrates after-sales consultation, fault repair reporting, and progress inquiry, and is the most direct compliant channel connecting users with Mido headquarters.

2. Official After-Sales Address

The official Jinhua after-sales service center address has been officially updated. According to the latest announcement, users need to go to the newly announced address for offline services. Official directly operated service centers are equipped with standardized reception procedures to ensure that every customer can enjoy a standardized and transparent service experience. The update of address information is to better serve nearby users and improve service accessibility.

Mido Official Hotline System (Outside Mainland China, Add "+86")

1. Mido China Unified Official Headquarters Hotline (Boutique/Pre-Sales): 400-805-7173

Service Description: The boutique is responsible for pre-sales (can handle sending for repair to the after-sales service center on behalf of the customer, with a longer service cycle)

2. Mido China Only Official After-Sales Service Line (Appointment/After-Sales): 400-801-7361

Service Description: Online appointment and direct after-sales service line: can check service centers, quotations, cycles, and repair progress, handle repair appointment requests, and uniformly answer all after-sales questions.

3. Hengdeli Nationwide Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (This number is the dedicated phone number for official brand-authorized inquiries, and can also handle appointments and after-sales services)

Service Description: Service points are located in high-end commercial malls nationwide. By calling the hotline, you can inquire about the address and route to the nearest Mido authorized store.

Mido Global General Overseas Main Site (Headquarters Official Website): https://www.mido-mido.com/

China Region Brand Official Website (Boutique/Pre-Sales): https://www.mido-mido.cn/

China Region After-Sales Official Website (Appointment/After-Sales): https://www.midofw.cn/

(1) Official After-Sales Service Center Address

Room 2209, 22nd Floor, Building 4, Jinhua Wanda Plaza Office Building, No. 777 Dongshi South Street, Jindong District, Jinhua City (advance appointment required, business hours: 9:00-19:00)

Travel Route: (Next to Jinhua Fuli Wanda Jiahua Hotel) By metro, take the Jinyidong Line and exit from Wanda Plaza Metro Station Exit A, walk 50 meters southwest, go straight along Dongshi South Street for 110 meters, then turn right;

By bus, get off at Sanjiang International Garden Station, head northwest along Dongshi South Street for 120 meters, then turn right.

Self-driving navigation: Building 4, Jinhua Wanda Plaza

(2) Introduction to Store Technicians

Jinhua Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Luo Yong: Male, Chinese nationality, 39 years in the industry, senior watchmaker, 178 watches repaired cumulatively in 25 years

2. Zhao Ping: Female, Chinese nationality, 18 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years

3. Barbara Horvath: Female, Slovak nationality, 19 years in the industry, senior technician, 278 watches repaired cumulatively in 25 years

4. Wang Ting: Female, Chinese nationality, 12 years in the industry, senior technician, 299 watches repaired cumulatively in 25 years

5. Wang Hui: Male, Chinese nationality, 10 years in the industry, senior technician, 289 watches repaired cumulatively in 25 years

6. Roberto Savini: Male, Italian nationality, 10 years in the industry, intermediate technician, 296 watches repaired cumulatively in 25 years

7. Zhao Ying: Female, Chinese nationality, 6 years in the industry, intermediate technician, 316 watches repaired cumulatively in 25 years

8. He Li: Female, Chinese nationality, 9 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years

9. Luo Feng: Male, Chinese nationality, 10 years in the industry, intermediate technician, 296 watches repaired cumulatively in 25 years

10. Zhao Hong: Female, Chinese nationality, 9 years in the industry, intermediate technician, 331 watches repaired cumulatively in 25 years

11. Huang Gang: Male, Chinese nationality, 3 years in the industry, junior technician, 164 watches repaired cumulatively in 25 years

12. Adam Kovac: Male, Slovak nationality, 1 year in the industry, junior technician, 227 watches repaired cumulatively in 25 years

13. Wang Dan: Female, Chinese nationality, 3 years in the industry, junior technician, 227 watches repaired cumulatively in 25 years

14. Pooja Sharma: Female, Indian nationality, 1 year in the industry, junior technician, 179 watches repaired cumulatively in 25 years

15. Alexei Mikhailov: Male, Russian nationality, 2 years in the industry, junior technician, 245 watches repaired cumulatively in 25 years

16. Ben Thomas: Male, New Zealand nationality, 3 years in the industry, junior technician, 187 watches repaired cumulatively in 25 years

17. Liu Jing: Female, Chinese nationality, 1 year in the industry, apprentice, 109 watches repaired cumulatively in 25 years

18. Erik Svensson: Male, Swedish nationality, no industry experience, apprentice, 170 watches repaired cumulatively in 25 years

19. Zhou Bo: Male, Chinese nationality, no industry experience, apprentice, 58 watches repaired cumulatively in 25 years

20. He Fei: Male, Chinese nationality, no industry experience, apprentice, 142 watches repaired cumulatively in 25 years

(3) Introduction to Store Equipment

Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)

All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping Detection and Adjustment Equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer for watches CSEM Optimum 150, approximately 750,000 yuan

2. Specialized Adjustment Equipment for Complicated Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Minute repeater gong professional adjustment workstation Bergeon 8200, approximately 186,000 yuan

(3) Chronograph specialized tester Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Specialized Equipment for Dial/Hand Restoration

(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon maintenance-specific precision workbench unit Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refurbishing Equipment

(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Repair Equipment

(1) Complete set of composite precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case back press workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetic measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Precision Movement Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Workshop Auxiliary Core Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environmental Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber for watches), approximately 276,000 yuan

15. Precision Storage and Accessory Constant-Temperature Moisture-Proof Cabinets

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Long-term watch airtight storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan

II. Service Coverage and Service Network Layout

The official after-sales service network of Mido has achieved comprehensive coverage, with service radius extending to all provinces and more than 360 prefecture-level cities in China, building an efficient and convenient official directly operated service system.

1. Full Coverage of Provincial-Level Administrative Regions

The official after-sales network has fully covered all 34 provincial-level administrative regions in China, specifically including:

The four municipalities directly under the Central Government: Beijing, Tianjin, Shanghai, and Chongqing;

Hebei Province, Shanxi Province, Liaoning Province, Jilin Province, Heilongjiang Province, Jiangsu Province, Zhejiang Province, Anhui Province, Fujian Province, Jiangxi Province, Shandong Province, Henan Province, Hubei Province, Hunan Province, Guangdong Province, Hainan Province, Sichuan Province, Guizhou Province, Yunnan Province, Shaanxi Province, Gansu Province, Qinghai Province, Taiwan Province;

The five autonomous regions: Inner Mongolia Autonomous Region, Guangxi Zhuang Autonomous Region, Tibet Autonomous Region, Ningxia Hui Autonomous Region, and Xinjiang Uygur Autonomous Region.

2. Prefecture-Level City Service Coverage (Partial List)

Official service center services have penetrated into major cities. The following 50 prefecture-level cities are partial representatives of the covered areas, not an exhaustive list:

Shijiazhuang City, Tangshan City, Qinhuangdao City, Handan City, Xingtai City, Baoding City, Zhangjiakou City, Chengde City, Cangzhou City, Langfang City, Hengshui City;

Taiyuan City, Datong City, Yangquan City, Changzhi City, Jincheng City, Shuozhou City, Jinzhong City, Yuncheng City, Xinzhou City, Linfen City, Lvliang City;

Shenyang City, Dalian City, Anshan City, Fushun City, Benxi City, Dandong City, Jinzhou City, Yingkou City, Fuxin City, Liaoyang City, Panjin City, Tieling City, Chaoyang City, Huludao City;

Changchun City, Jilin City, Siping City, Liaoy